Signalling: Procedures

For assistance, email standards@artc.com.au or visit the Engineering Help pages. To report an issue in an engineering document or propose a change, please complete EGP0101F-02 Engineering Document Change Request and email this to standards@artc.com.au.

This page contains documents that are currently known as Policies, Procedures, Standards, Engineering Instructions and Specifications.

Where there is conflict between any Standards, Procedures or Specifications published, the Common Standards that are applicable network wide take precedence, unless otherwise indicated.

Engineering Instructions take precedence over Standards, Procedures and Specifications for that particular subject.

Signalling Procedures are published by document category which is based on the life cycle of the infrastructure and then by detail code which groups particular infrastructure elements together.

The State in which the document is applicable is shown in the Applicability table. Note, documents marked with NSW applicability also apply to QLD by default.

General
Design
Material
Construction
Configuration
Examination
Maintenance
Training

General back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
General
S5	S5 Signals - Decommissioning	04 May 99	1.1	SA/WA Specification	S	W
SGS 01	Glossary of Signalling Terms	14 Mar 05	1.2	NSW Standard				N	Q
SGS 02	Glossary of Terms	14 Mar 05	1.2	NSW Standard				N	Q
ESI-00-02	Implementing Signalling Standards	12 Feb 09	1.0	Engineering Instruction	S	W	V	N	Q
ESG-00-15	ARTC Quality Controlled Supplier	27 Nov 14	1.0	Engineering Instruction	S	W	V	N	Q

Design back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
General
ESI-05-14	Signal Design and Maintenance of Configuration Information	04 Jul 17	1.0	Engineering Instruction	S	W	V	N	Q
ESI-05-13	Signal Design and Standards Applicability	07 Mar 17	1.0	Engineering Instruction	S	W	V	N	Q
S1	S1 Signals - Design and Rating	13 Aug 10	3.0	SA/WA Specification	S	W
SDS 00	Introduction	14 Mar 05	1.2	NSW Standard				N	Q
SCP 01	Signalling Control Systems	14 Mar 05	1.2	NSW Standard				N	Q
SDS 05	Speed Restrictions	14 Mar 05	1.2	NSW Standard				N	Q
SDS 06	Notice Boards	14 Mar 05	1.2	NSW Standard				N	Q
SDS 07	Single Line Sections	14 Mar 05	1.2	NSW Standard				N	Q
SDS 08	Bi-Directional Signalling	14 Mar 05	1.2	NSW Standard				N	Q
SDS 15	Train Stops	14 Mar 05	1.2	NSW Standard				N	Q
SDS 20	Warning Lights	14 Mar 05	1.2	NSW Standard				N	Q
SDS 21	Placing Signals at Stop to Protect a Worksite	14 Mar 05	1.2	NSW Standard				N	Q
ESD-00-02	Measurement of Signalling Distances	09 Jun 20	1.1	Common Standard	S	W	V	N	Q
ESD-08-03	Placement of Yard Limit Signs	09 May 12	1.0	NSW Standard				N	Q
SDS 25	Signalling Circuit Design Standards	14 Mar 05	1.2	NSW Standard				N	Q
ESD-05-17	Signalling Requirements for Dual Gauge Areas	20 Oct 22	1.0	Common Standard	S	W	V	N	Q
Control, Indication, Monitors, Wayside Equipment
SDS 16	Controls and Indications	14 Mar 05	1.2	NSW Standard				N	Q
Level Crossings
ESD-03-01	Level Crossing Design	04 Oct 22	1.5	Common Standard	S	W	V	N	Q
ESD-03-02	Level Crossing Predictor Design Certification and Test	14 Apr 22	1.3	Common Standard	S	W	V	N	Q
ESD-05-05	Level Crossing Monitoring Requirements	09 May 22	1.0	Common Standard	S	W	V	N	Q
Interlockings, CBI Field Equipment
ESD-05-01	Common Signal Design Principles - S1 - Signalling Locking and Train Dynamics	13 Oct 15	3.0	Common Standard	S	W	V	N	Q
ESD-05-03	Train Braking Application Design	04 Oct 18	1.1	Common Standard	S	W	V	N	Q
ESD-05-11	Microlok Data Design Records (Addressing, File Control, Checking, and FAT Testing)	17 Feb 14	1.3	Common Standard	S	W	V	N	Q
ESD-05-12	Microlok II Design	13 Aug 10	1.3	Common Standard	S	W	V	N	Q
ESI-05-11	Microlok Address Management	05 Feb 14	1.0	Engineering Instruction	S	W	V	N	Q
SCP 23	Design of Microlok II Interlockings	25 Jun 10	1.4	NSW Standard				N	Q
SDS 01	Signals	25 Aug 06	2.0	NSW Standard				N	Q
SDS 04	Overlaps	14 Mar 05	1.2	NSW Standard				N	Q
SDS 13	Local Control	14 Mar 05	1.2	NSW Standard				N	Q
Points, Release Switches
ESD-05-21	Split Detection of Points (Hunter Valley Only)	30 Jun 20	1.0	Guideline				N	Q
Field Equipment: Track Circuits, Trackside Equipment and Train Detection System
ESD-05-13	Resetting of Frauscher Axle Counter Systems	18 Jan 22	1.0	Guideline	S	W	V	N	Q
ESD-05-14	Frauscher Axle Counter Systems	18 Oct 21	1.0	Common Standard	S	W	V	N	Q
ESD-05-15	Design of Frauscher Axle Counters	15 Dec 21	1.0	Guideline	S	W	V	N	Q
ESD-07-01	Points	09 Oct 20	1.0	Common Standard	S	W	V	N	Q
ESD-07-02	Track Bonding and Signalling Infrastructure in Electrified Areas	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
SDS 17	Track Circuits	14 Mar 05	1.2	NSW Standard				N	Q
ESD-07-04	Train Protection Warning System	17 Oct 22	1.3	Common Standard	S	W	V	N	Q
Train Authority Systems, Train Order Systems, Token and Tokenless Block
ESD-08-01	Train Order Working	22 Dec 20	1.8	Common Standard	S	W	V	N	Q
ESS-08-01	Advanced Train Management System Trackside Signalling Design Requirements (formerly ESD-08-02) This document has been relocated to the ATMS Tab on the Extranet
SDS 24	Arrangement of Infrastructure at Signalling to Train Order and Token Area Boundaries	14 Mar 05	1.2	NSW Standard				N	Q
Power Supply
ESS-09-01	Solar Power Supply Systems (formerly ESD-09-02)	18 Sep 23	1.1	Standard	S	W	V	N	Q
ESS-09-02	Signalling Power Systems (formerly ESD-09-01)	31 Oct 23	1.0	Standard	S	W	V	N	Q
Enclosures
ESA-12-01	Pits requirements for Signalling Applications	13 Jun 20	1.0	Specification	S	W	V	N	Q
Design Practices
ESD-25-01	CAD and Drafting Manual for Signalling Drawings	07 Sep 22	1.3	Common Standard	S	W	V	N	Q
ESD-25-03	Signalling Documentation and Drawings	07 Sep 22	1.0	NSW Standard				N	Q
Rolling Stock Interface
ESS-32-01	Rolling Stock Signalling Interface (formerly ESD-32-01)	15 Jun 23	1.0	Standard	S	W	V	N	Q
ESD-32-02	ATMS Equipped Train Braking Standard This document has been relocated to the ATMS Tab on the Extranet

Material back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
General
SPS 02	Environmental Conditions	06 May 05	1.3	NSW Standard				N	Q
ESA-07-01	Signs, Notice Plates and Instruction Plates	04 Feb 19	1.1	NSW Standard				N	Q
SPS 04	General Requirements for Labelling of Equipment	06 May 05	1.2	NSW Standard				N	Q
SPS 05	Electrical and Electronic Components (Ratings and Construction Requirements)	06 May 05	1.3	NSW Standard				N	Q
SPS 06	Connectors for Signalling Interface	06 May 05	1.2	NSW Standard				N	Q
SPS 07	Vital Indication Optoisolator	06 May 05	1.2	NSW Standard				N	Q
SPS 09	Battery Voltage Monitor and Alarm	06 May 05	1.2	NSW Standard				N	Q
SPS 10	Relays Plug-in Vital	06 May 05	1.3	NSW Standard				N	Q
ESA-04-01	Colourlight Signals and Indicators	10 Feb 23	1.0	Network Wide	S	W	V	N	Q
SPS 12	Signal Lamps	06 May 05	1.2	NSW Standard				N	Q
SPS 13	Electro-pneumatic Train Stops	06 May 05	1.3	NSW Standard				N	Q
SPS 14	Hydraulic Train Stops	06 May 05	1.3	NSW Standard				N	Q
SPS 16	Point Mechanisms	06 May 05	1.3	NSW Standard				N	Q
SPS 17	6 ohm Track Resistor	06 May 05	1.2	NSW Standard				N	Q
SPS 18	Centre-tapped Electrolysis Bond Chokes (30ARAIL)	06 May 05	1.2	NSW Standard				N	Q
SPS 19	Impedance Boards	06 May 05	1.3	NSW Standard				N	Q
SPS 23	Single Phased Air Cooled, Isolating Transformer for Signalling Applications	06 May 05	1.3	NSW Standard				N	Q
SPS 24	Emergency Changeover Contactor Panel	06 May 05	1.3	NSW Standard				N	Q
SPS 25	High Speed Emergency Changeover Contactor Panel	06 May 05	1.3	NSW Standard				N	Q
ESA-09-03	Mains Failure Plant	04 Oct 22	1.1	Specification	S	W	V	N	Q
SPS 32	Fuses For Railway Signalling Applications	06 May 05	1.2	NSW Standard				N	Q
SPS 33	Solderless Terminals - Cable Lugs for Signalling Applications	06 May 05	1.2	NSW Standard				N	Q
SPS 51	Solderless Terminals Screw and Sprint Clamp Terminal Blocks	06 May 05	1.3	NSW Standard				N	Q
ESA-00-01	Approved Signalling Items for the ARTC Network	24 Apr 23	1.6	Specification	S	W	V	N	Q
Remote Control, Control Systems
SPS 01	Standard Requirements for Signalling Electronic Systems	06 May 05	1.3	NSW Standard				N	Q
Field Equipment: Track Circuits, Trackside Equipment
SPS 20	High Voltage Impulse Track Circuits	06 May 05	1.2	NSW Standard				N	Q
SPS 21	Audio Frequency Jointless Track Circuits for Main Line	06 May 05	1.3	NSW Standard				N	Q
Power Supply
ESA-09-05	DC Power Supply Units and Battery Charger Power Supplies for Signalling Equipment	28 May 23	1.0	Specification	S	W	V	N	Q
SPS 34	Lightning/Surge Protection - Inductor/Varistor Panel	06 May 05	1.3	NSW Standard				N	Q
SPS 35	Lightning/Surge Protection - Varistor/Arrestor Panel (Vap)	06 May 05	1.3	NSW Standard				N	Q
SPS 36	Lightning/Surge Protection - Varistor Panel	06 May 05	1.3	NSW Standard				N	Q
SPS 37	Lightning/Surge Protection - Power Inductors	06 May 05	1.3	NSW Standard				N	Q
SPS 38	Lightning/Surge Protection for Communication Lines LPU	06 May 05	1.3	NSW Standard				N	Q
SPS 39	Lightning/Surge Protection Inductor/Diverter Panel	06 May 05	1.3	NSW Standard				N	Q
Cable and Line Route
ESA-11-01	Cables for Railway Signalling Applications - General Requirements	08 Nov 22	2.4	Common Standard	S	W	V	N	Q
ESA-11-03	Specification for Cable Jointing Material (formerly SPS 41)	04 Apr 23	1.0	Specification	S	W	V	N	Q
SPS 46	Cables for Railway Signalling Applications - Fire Safe High Frequency Screened Track Circuit Cable	06 May 05	1.3	NSW Standard				N	Q
SPS 48	Cables for Railway Signalling Applications - High Frequency Screened Track Circuit Cables	06 May 05	1.3	NSW Standard				N	Q
SPS 49	Cables for Railway Signalling Applications - Traction Return Bonding And Track Connection Cables	10 Feb 15	1.3	NSW Standard				N	Q

Construction back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
General
SCP 05	Signalling Electronic Systems Verification	14 Mar 05	1.2	NSW Standard				N	Q
SCP 16	Signalling Operator Interface	14 Mar 05	1.2	NSW Standard				N	Q
SCP 19	Air Reticulation Systems	14 Mar 05	1.2	NSW Standard				N	Q
Level Crossings
ESC-03-01	Level Crossing Construction	04 Oct 22	1.4	Common Standard	S	W	V	N	Q
Signals
ESC-04-01	Signal Sighting and Position	27 Oct 10	1.4	Common Standard	S	W	V	N	Q
ESC-04-02	Post Mounted Signals - Ladders	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
Interlockings, CBI Field Equipment
SCP 17	Computer Based Interlocking Requirements	14 Mar 05	1.2	NSW Standard				N	Q
Field Equipment: Track Circuits, Trackside Equipment
ESC-07-01	Installation of Trackside Equipment	14 Feb 22	1.4	Common Standard	S	W	V	N	Q
ESC-07-03	Small Buildings, Location Cases, Terminal Cases and General Purpose Cases	12 Oct 09	1.0	Common Standard	S	W	V	N	Q
SCP 22	Small Buildings, Location Cases, Terminal Cases and General Purpose Cases	14 Mar 05	1.2	NSW Standard				N	Q
ESC-07-04	Installation of Equipment Racks and Termination of Cables and Wiring	12 Nov 19	1.2	Common Standard	S	W	V	N	Q
SCP 20	Installation of Equipment Racks and Termination of Cables and Wiring	14 Mar 05	1.2	NSW Standard				N	Q
Power Supply
ESC-09-02	Lightning and Surge Protection Requirements	12 Oct 09	1.0	Common Standard	S	W	V	N	Q
SCP 04	Lightning and Surge Protection Requirements	14 Mar 05	1.2	NSW Standard				N	Q
Communications for Signalling
PP-165.2	New Signal Locations without Signal Post Telephones This document has been relocated to the Communications Tab on the Extranet
ESC-10-01	Network Switch, Router and Modem requirements for Signalling Applications This document has been relocated to the Communications Tab on the Extranet
Cable and Line Route
ESC-11-01	Construction of Cable Route and Associated Civil Works	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
SCP 21	Construction of Cable Route and Associated Civil Works	24 Jun 10	1.3	NSW Standard				N	Q
Commissioning
ESC-21-01	Inspection and Testing of Signalling - Roles, Responsibilities and Authorities	15 Sep 21	1.4	Common Standard	S	W	V	N	Q
ESC-21-02	Inspection and Testing of Signalling - Plans, Programs, Documentation and Packages	07 Sep 22	1.3	Common Standard	S	W	V	N	Q
ESC-21-03	Inspection and Testing of Signalling - Inspection and Testing Principles	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
ESC-21-04	Inspection and Testing of Signalling - Standard Forms	17 Oct 22	1.3	Common Standard	S	W	V	N	Q

Configuration back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
General
PP-130	Control of Software Configuration for Signalling and Communications Systems	21 Dec 06	1.4	Process Procedure	S	W	V
PP-144	Collection of Signalling System Condition Data	09 Aug 04	1.3	Process Procedure	S	W	V	N	Q
PP-145	Collection of Communications System Condition Data This document has been relocated to the Communications Tab on the Extranet

Examination back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
Field Equipment: Track Circuits, Trackside Equipment
SES 01	DC Track Circuits - Set-up Test and Certification	11 Jun 10	1.3	NSW Standard				N	Q
SES 02	AC Immune DC Track Circuits Set-Up, Test and Certification	16 Jun 10	1.3	NSW Standard				N	Q
SES 03	Jeumont-Schneider Impulse Track Circuits - Set-up, Test and Certification	06 Aug 10	1.3	NSW Standard				N	Q
SES 04	AC Single Rail Track Circuits - Set-up, Test and Certification	16 Jun 10	1.3	NSW Standard				N	Q
SES 05	AC Double Rail Track Circuits - Set-up, Test and Certification	16 Jun 10	1.3	NSW Standard				N	Q
SES 06	CSEE UM 71 AF Jointless Track Circuits - Set-up, Test and Certification	06 Aug 10	1.3	NSW Standard				N	Q
SES 07	WB&S FS2500 AF Jointless Track Circuits - Set-up, Test and Certification	18 Jun 10	1.3	NSW Standard				N	Q
SES 08	ML T121 AF Jointless Track Circuits - Set-up, Test and Certification	18 Jun 10	1.3	NSW Standard				N	Q

Maintenance back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
General
ESM-00-01	Signal Inspection	09 Jan 19	1.4	Common Standard	S	W	V	N	Q
ESM-00-02	Failures	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
ESM-00-03	Signalling Irregularities and Wrong Side Failures	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
ESM-00-04	Management of Signalling and Control System Failures	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
ESM-00-10	Testing and Certifying Equipment Worked on or Altered During Maintenance	13 Aug 10	1.3	Common Standard	S	W	V	N	Q
ESM-00-12	Disconnection of Signalling Apparatus	13 May 16	1.0	Procedure				N
ESM-00-20	Like for Like Renewals	19 Sep 16	1.1	Procedure	S	W	V	N	Q
ESS-00-01	Rerailing – Precautions to be Taken (formerly ESM-00-13)	24 Jul 23	1.0	Standard	S	W	V	N	Q
ESI-06-03N	Inspection of Point Claw Locking Brackets	13 Apr 06	1.0	Engineering Instruction	S	W	V	N	Q
ESI-06-04A	Westinghouse LED Signal Modules	10 Jul 06	1.0	Engineering Instruction	S	W	V	N	Q
ESI-04-01	Westinghouse Signal LED Module Failure	19 Aug 13	1.0	Engineering Instruction	S	W	V	N	Q
ESI-06-07	Track Circuit Resistors	08 Nov 06	1.0	Engineering Instruction	S	W	V	N	Q
ESI-07-01	Irregular Operation of Westinghouse Releasing Switch	13 Apr 07	1.0	Engineering Instruction	S	W	V	N	Q
PP-148	Signals Fault Management	02 Nov 08	1.3	Process Procedure	S	W	V	N	Q
S4	S4 Signals - Work on Asset	04 May 99	1.1	SA/WA Specification	S	W
SMP 01	Introduction to Signalling Maintenance Procedures	14 Mar 05	1.2	NSW Standard				N	Q
SMP 03	Accidents or Derailments - Action to be Taken	14 Mar 05	1.2	NSW Standard				N	Q
SMP 04	Failures	8 Jun 10	1.4	NSW Standard				N	Q
SMP 06	Release of Track Locking or Indication Locking	14 Mar 05	1.1	NSW Standard				N	Q
SMP 07	Apparatus Seldom Used	14 Mar 05	1.2	NSW Standard				N	Q
SMP 08	Booking Signalling Equipment Out of Use	14 Mar 05	1.2	NSW Standard				N	Q
SMP 10	Testing and Certifying Equipment Worked on or Altered During Maintenance	24 Jun 10	1.4	NSW Standard				N	Q
SMP 12	Repair/Replacement of Signalling Wires	14 Mar 05	1.1	NSW Standard				N	Q
SMP 13	Field Paralleling of Signalling Contacts	14 Mar 05	1.1	NSW Standard				N	Q
SMP 14	Document Control of Signal Plans and Circuit Books Issued to the Field	14 Mar 05	1.2	NSW Standard				N	Q
SMP 16	Notification of Whereabouts and Liaison with Signallers	14 Mar 05	1.2	NSW Standard				N	Q
SMP 18	Depot Overhaul of Vital Signalling Equipment	14 Mar 05	1.2	NSW Standard				N	Q
SMP 19	Cleanliness and Lubrication of Mechanical Signalling Equipment	14 Mar 05	1.1	NSW Standard				N	Q
SMP 20	Security, Fire Protection, Weather Proofing and Cleanliness of Signalling Equipment, Housings and Locations	14 Mar 05	1.1	NSW Standard				N	Q
SMP 21	Minor Signalling Works on Maintenance Areas Involving Removal or Altering of Signalling Equipment	14 Mar 05	1.2	NSW Standard				N	Q
SMP 27	Traction Return (1500V DC)	14 Mar 05	1.1	NSW Standard				N	Q
SMP 40	Use of Radio Transmitters Near Electronic Signalling Systems	14 Mar 05	1.1	NSW Standard				N	Q
SMP 41	Pole Route	14 Mar 05	1.2	NSW Standard				N	Q
SMP 43	Guidelines for Irregularity Inspection and Testing to Determine Cause	14 Mar 05	1.2	NSW Standard				N	Q
SMP 44	General Signalling Maintenance Management, Administration and Supervision Responsibilities	14 Mar 05	1.1	NSW Standard				N	Q
SMP 46	Guidelines for the Safe Use of Temporary Recording, Monitoring and Logging Equipment on Signalling Systems	14 Mar 05	1.2	NSW Standard				N	Q
ESH-00-07	Tools and Instruments for Signalling Application	22 Jan 21	1.0	Guideline	S	W	V	N	Q
Level Crossings
ESM-03-01	Level Crossing and Pedestrian Crossing Maintenance	06 Sep 22	1.2	Common Standard	S	W	V	N	Q
Signals
ESM-04-01	Maintenance and Sighting of Semaphore Signals and Train Authority Indicators	13 Aug 10	1.3	Common Standard	S	W	V	N	Q
SMP 31	Maintenance of Signal Sighting and Signals	02 Jun 10	1.3	NSW Standard				N	Q
Interlockings, CBI Field Equipment
ESI-05-15	Work Instruction for Testing BR930 Series Relays using the MRD RelayDoc Test Tool	20 Jan 17	1.0	Work Instruction	S	W	V	N	Q
ESM-05-01	Testing of Interlockings - Maintenance Responsibilities	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
ESP-05-02	Vital Signal Relays	13 Sep 23	1.0	Procedure	S	W	V	N	Q
SMP 32	Solid State Interlocking (SSI)	14 Mar 05	1.2	NSW Standard				N	Q
SMP 38	Microlok Computer Based Interlocking	14 Mar 05	1.2	NSW Standard				N	Q
SMP 39	Westrace Computer Based Interlocking	14 Mar 05	1.2	NSW Standard				N	Q
Points, Release Switches
SMS 04	Mechanical Points and Ground Frames	14 Mar 05	1.2	NSW Standard				N	Q
SMS 03	Electro-Pneumatic Points - Styles Control Valve	14 Mar 05	1.1	NSW Standard				N	Q
SMS 05	The Claw Lock Mechanism - Description and Operation	14 Mar 05	1.2	NSW Standard				N	Q
SMS 06	The Claw Lock Mechanism - Safety and Functional Test Routine Maintenance	14 Mar 05	1.2	NSW Standard				N	Q
SMS 07	The Claw Lock Mechanism - Overhaul	14 Mar 05	1.1	NSW Standard				N	Q
SMS 08	The Claw Lock Mechanism - Installation of Turnouts	14 Mar 05	1.1	NSW Standard				N	Q
SMS 09	The Claw Lock Mechanism - Installation on Swing Nose Crossings	14 Mar 05	1.1	NSW Standard				N	Q
SMS 10	The Claw Lock Mechanism - Installation on Switch Rollers	14 Mar 05	1.1	NSW Standard				N	Q
ESI-06-01	Claw Lock Failure	08 Oct 14	1.0	Engineering Instruction	S	W	V	N	Q
ESS-06-01	Facing Point Lock and Detection Testing	13 Nov 23	1.0	Standard	S	W	V	N	Q
Field Equipment: Track Circuits, Trackside Equipment
ESI-07-08	Asbestos Risk for Signalling Personnel - UM71 Track Circuits	12 Sep 22	1.0	Engineering Instruction	S	W	V	N	Q
ESM-07-02	Track Circuits and Train Detection Devices	19 Nov 20	1.3	Common Standard	S	W	V	N	Q
ESM-07-03	Microtrax Coded Track Circuits	13 Aug 10	1.3	Common Standard	S	W	V	N	Q
ESM-07-04	Unreliable Track Circuit due to Infrequent Train Operations	18 Nov 20	1.0	Common Standard	S	W	V	N	Q
SMP 15	Location of Track Side Equipment	14 Mar 05	1.2	NSW Standard				N	Q
SMP 37	Microtrax Coded Track Circuits	02 Jun 10	1.3	NSW Standard				N	Q
SMS 01	Track Side Monitoring Equipment	14 Mar 05	1.2	NSW Standard				N	Q
SMS 11	Jeumont Schneider Track Circuits	14 Mar 05	1.1	NSW Standard				N	Q
SMS 12	Westinghouse FS 2600 Manual	14 Mar 05	1.1	NSW Standard				N	Q
Train Authority Systems, Train Order Systems, Token and Tokenless Block
ESM-08-01	Electric Train Staff Instruments	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
SMP 34	Custody, Storage and Despatch of Staff and Keys	14 Mar 05	1.1	NSW Standard				N	Q
SMP 35	Use of Master Keys and Staffs	14 Mar 05	1.2	NSW Standard				N	Q
Power Supply
ESM-09-01	Work on Signalling Power Mains	25 Jun 21	1.0	Standard	S	W	V	N	Q
Communications for Signalling
PP-149	Communications Fault Management This document has been relocated to the Communications Tab on the Extranet
PP-165.1	Removal of Signal Post Telephones This document has been relocated to the Communications Tab on the Extranet
Cable and Line Route
ESM-11-01	Insulation Inspection & Testing	24 May 21	1.2	Common Standard	S		V	N	Q
ESI-11-10	ELD Routine Testing	29 Jan 15	1.0	Engineering Instruction	S		V	N	Q
ESI-11-11	Surge Protection Testing	29 Jan 15	1.0	Engineering Instruction	S		V	N	Q
ESI-11-12	Testing Microprocessor Signals Equipment	29 Jan 15	1.0	Engineering Instruction	S		V	N	Q
In Service
ESM-24-01	Bridging or False Feeding Signalling Circuits	16 Nov 21	1.4	Common Standard	S	W	V	N	Q
Maintenance Plans
PP-150	Maintenance Plan Development for Signalling	12 Jan 04	1.2	Process Procedure	S	W	V	N	Q
ESM-26-02	Signals Technical Maintenance Plan	12 Oct 22	3.4	Common Standard	S	W	V	N	Q

Training back to top

Number	Title	Last Updated	Version	Document Type	Applicability
				(under current document structure)	SA (S)	WA (W)	VIC (V)	NSW (N)	QLD (Q)
Staff Competency and Training
EST-20-01	Signal Standards and Equipment Training Courses	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
EST-20-02	Signals Staff Competency Assessment	13 Aug 10	1.2	Common Standard	S	W	V	N	Q
EST-20-03	Applying for Signals Competency	09 Mar 21	2.0	Work Instruction	S	W	V	N	Q
EST-20-05	Signals Competency - Training for a New Skill or Higher Competency Level	02 May 17	1.1	Common Standard	S	W	V	N	Q
ETD-20-02	Technical Note – Signals Rail Safety Worker Competence	25 Oct 16	1.0	Technical Note	S	W	V	N	Q

Controlled documents are as published on this site and are uncontrolled when printed