Signalling: Standard Drawings
For assistance, email standards@artc.com.au or visit the Engineering Help pages. To report an issue in an engineering document or propose a change, please complete EGP0101F-02 Engineering Document Change Request and email this to standards@artc.com.au.
There are several types of documents that are provided to support the applications of the signalling standards/procedures and work instructions. These may be applicable to design, construction, maintenance, training or materials. These are included in this section. They are to be read as supporting the documents in the other sections.
Signalling Guidelines are published by document category which is based on the life cycle of the infrastructure and then by detail code which groups particular infrastructure elements together.
The State in which the document is applicable is shown in the Applicability table. Note, documents marked with NSW applicability also apply to QLD by default.
For copies of drawings, please contact your local Aconex Administrator.
If you are external to ARTC and working on an ARTC project, please contact your ARTC Project Manager.
Typical Circuitsback to top
| Number | Title | Last Updated | Version | Document Type |
Relevant Procedure or Work Instruction | Applicability | ||||
|---|---|---|---|---|---|---|---|---|---|---|
(under current document structure) |
SA (S) | WA (W) | VIC (V) | NSW (N) | QLD (Q) | |||||
| Power Arrangement | ||||||||||
| - | Cragg Rail Charger 40DTC-12V | 08/03/2016 | 1.0 | Design | S | W | V | N | Q | |
| - | ELTEK UPS 240VAC IN-OUT | 10/11/2015 | 2.0 | Design | - | S | W | V | N | Q |
| - | ELTEK UPS 120VAC IN-OUT | 09/11/2015 | 4.0 | Design | - | S | W | V | N | Q |
| - | UPS Changeover Typical Arrangement | 29/07/2015 | 1.0 | Design | - | S | W | V | N | Q |
Mechanical Drawingsback to top
| Number | Title | Last Updated | Version | Document Type |
Relevant Procedure or Work Instruction | Applicability | ||||
|---|---|---|---|---|---|---|---|---|---|---|
(under current document structure) |
SA (S) | WA (W) | VIC (V) | NSW (N) | QLD (Q) | |||||
| Power Arrangement | ||||||||||
| - | MRD EarthLogger | 14/04/2015 | 1.0 | Design | - | S | W | V | N | Q |
Drawing Resourcesback to top
| Number | Title | Last Updated | Version | Document Type |
Relevant Procedure or Work Instruction | Applicability | ||||
|---|---|---|---|---|---|---|---|---|---|---|
(under current document structure) |
SA (S) | WA (W) | VIC (V) | NSW (N) | QLD (Q) | |||||
| - | CAD Cell Library (NSW) | 27/04/2016 | 1.0 | CAD Cell | S | W | V | N | Q | |
| - | Signal Drawing Templates (NSW) | |||||||||
Train Detectionback to top
| Number | Title | Last Updated | Version | Document Type |
Relevant Procedure or Work Instruction | Applicability | ||||
|---|---|---|---|---|---|---|---|---|---|---|
(under current document structure) |
SA (S) | WA (W) | VIC (V) | NSW (N) | QLD (Q) | |||||
| AXR13 | Axle Counter Reset Circuits | 02/04/2020 | A | Design | Type Approval NESA-S054 | S | W | V | N | Q |