For assistance, email email@example.com or visit the Engineering Help pages. To report an issue in an engineering document or propose a change, please complete EGP0101F-02 Engineering Document Change Request and email this to firstname.lastname@example.org.
This page provides links to registers which detail approved variations to Engineering Standards and clearance infringements.
The Engineering Waiver Approval Register can be found below:
|EGP0201R-01||Engineering Waiver Approval Register|
The process by which ARTC Engineering Waiver Approvals are to be managed is outlined in EGP-02-01 Engineering Waiver Management
A PowerPoint Presentation summarising the process is available here: Waiver Presentation
How to apply for an Engineering Waiver
- Step 1 – Complete EGP0201F-01 Engineering Waiver Approval Form
- Step 2 – Complete a Risk Assessment in accordance with the Risk Management Procedure and Work Instructions
- Step 3 – Submit to appropriate ARTC Endorsement Authority for endorsement
- Step 4 – Submit completed and endorsed waiver form, with supporting documentation, to email@example.com for approval
NSW Standard ETM-07-01 Management of Clearances sets out the conditions under which reduced safety clearance margins may be authorised on a temporary or permanent basis. This process is currently being reviewed and is subject to change. Clearance measurement data is currently being collated and refined.
The Transit Space Infringement Register can be found below:
|BDS14R-01||Transit Space Infringement Register|
NOTE: Items in RED were approved by Rail Infrastructure Corporation and adopted by ARTC but do not include detailed information of infringement(s) and/or RIC approval details cannot be verified so cannot be relied upon. For works at these locations, exact infringement details must be checked, recorded and submitted to Manager Standards for approval.